What version of the software are you running?
Rory From: Af [mailto:[email protected]] On Behalf Of Gino Villarini via Af Sent: Tuesday, December 23, 2014 4:41 AM To: [email protected] Subject: Re: [AFMUG] Mimosa B5/B5c shipping.. Integrated unit, gain was up to spec… repalced with ptp600, we were getting 20-30 mbps under similar circumstances. Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: "[email protected]" <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Tuesday, December 23, 2014 at 6:37 AM To: "[email protected]" <[email protected]> Subject: Re: [AFMUG] Mimosa B5/B5c shipping.. Sounds like 5GHz isn‘t usable at all there. You tested the integrated unit? Doesnt the higher gain antenna help? Does the Antenna deliver the calculated gain? Would be interesting to compare it to a PTP600/650. Von: Af [mailto:[email protected]] Im Auftrag von Gino Villarini via Af Gesendet: Dienstag, 23. Dezember 2014 11:07 An: [email protected] Betreff: Re: [AFMUG] Mimosa B5/B5c shipping.. We tried a 2.5 mile link on a heavy noise floor area. Linked at –52, best channel we could find gav2 us a 12db SNR… only passed 1meg. Going to try on another area Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: "[email protected]" <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Tuesday, December 23, 2014 at 1:41 AM To: "[email protected]" <[email protected]> Subject: Re: [AFMUG] Mimosa B5/B5c shipping.. It’s pretty good. We don’t have a high noise environment although I can run tests in 5.8GHz which would be pretty noisy. Rory From: Af [mailto:[email protected]] On Behalf Of Gino Villarini via Af Sent: Monday, December 22, 2014 2:03 PM To: <[email protected]> Subject: Re: [AFMUG] Mimosa B5/B5c shipping.. How's your noise? Gino A. Villarini @gvillarini On Dec 22, 2014, at 4:35 PM, Rory Conaway via Af <[email protected]> wrote: The unit is still in Beta mode so all the features aren’t fully operations. Right now it’s best used with fixed frequencies, either on the same channel or split channels. For example, you can run 40MHz on 5.8HGz and 40MHz on 5.1GHz for long range links. When the auto function is implemented fully, the radio will make that decision for you. Right now the radios are working fine. Chuck Hogg is pushing a lot more data through his than I am though. Rory From: Af [mailto:[email protected]] On Behalf Of Stefan Englhardt via Af Sent: Monday, December 22, 2014 5:57 AM To: [email protected] Subject: Re: [AFMUG] Mimosa B5/B5c shipping.. This is what I want and should be possible from looking at the data. But as there are testers on this forum it might not be neccesary to do guesswork ;-)). Von: Af [mailto:[email protected]] Im Auftrag von Mike Hammett via Af Gesendet: Montag, 22. Dezember 2014 13:34 An: [email protected] Betreff: Re: [AFMUG] Mimosa B5/B5c shipping.. I would expect it to be seamless as the radio still has connectivity on one channel during all of this. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com <https://www.facebook.com/ICSIL> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> <https://www.linkedin.com/company/intelligent-computing-solutions> <https://twitter.com/ICSIL> ________________________________ From: "Eric Kuhnke via Af" <[email protected]> To: [email protected] Sent: Monday, December 22, 2014 3:48:20 AM Subject: Re: [AFMUG] Mimosa B5/B5c shipping.. I'm curious to see what the seamless channel change looks like in terms of "hiccup" across each side of an OSPF /30 between a pair of routers... How many milliseconds of weirdness, if you're logged into a router console on one end and pinging the other? On Mon, Dec 22, 2014 at 8:15 AM, Stefan Englhardt via Af <[email protected]> wrote: Are there still NDAs or can you share you’re experience? Esp. the advanced features like background channel scan with seamless channel change and overall stability. Does channel reuse work, how does it coexist with a ePMP on nearby channels … Von: Af [mailto:[email protected]] Im Auftrag von Rory Conaway via Af Gesendet: Samstag, 20. Dezember 2014 04:14 An: [email protected] Betreff: Re: [AFMUG] Mimosa B5/B5c shipping.. Chuck is doing more long range testing and we are testing more for relaying, higher density deployment for a different model. Rory From: Af [mailto:[email protected]] On Behalf Of Bill Prince via Af Sent: Friday, December 19, 2014 4:03 PM To: [email protected] Subject: Re: [AFMUG] Mimosa B5/B5c shipping.. I had to look at their web site to remind me what's going on there. They don't use 4 polarities, they use 2.ï¿1Ž2 They're not running 4x4 MIMO, they're running 2x2 MIMO X 2.ï¿1Ž2 So they use two radios at each end, and two separate channels. -- bp <part {dash} 15 {at} SkylineBroadbandService {dot} com> On 12/19/2014 2:32 PM, Peter Kranz via Af wrote: So anyone who did the beta on these want to do a writeup for the list? Is the 4x4 all different circular polarization variants? Kinda looks like it from the funny antenna elements. ï¿1Ž2 Peter Kranz Founder/CEO - Unwired Ltd www.UnwiredLtd.com <http://www.unwiredltd.com/> Desk: 510-868-1614 x100 Mobile: 510-207-0000 [email protected] ï¿1Ž2
