I am posting this to the list. Perhaps someone there will give you some
ideas.
Best results will be achieved if you subscribe to the list.
-----Original Message-----
From: John Ockert
Sent: Wednesday, December 24, 2014 10:46 AM
To: Chuck McCown
Subject: Re: WBMfg Website Comment/Feedback
it isn't interference. here are my stats
uplink rssi -54
downlink rssi -55
uplink snr 31
downlink snr 30
uplink mcs 4
downlink mcs 15
everything looks good except the upload data rate and capacity.
John Ockert
Systems Engineer
Wyerless
Work: 417-680-7090
Email: [email protected]
Website: http://www.wyerless.com
________________________________________
From: Chuck McCown <[email protected]>
Sent: Tuesday, December 23, 2014 1:53 PM
To: John Ockert; WBMfg
Subject: Re: WBMfg Website Comment/Feedback
This is why OMNIs are not terribly popular. They receive interference from
360 degrees.
Most folks only use OMNIs in areas where the distance can be very short.
You might want to post this question on the [email protected] email list. Just
post something to that address and it will reply with info as to how to
subscribe to the list.
There are about 600 people there operating this equipment, the
manufacturer's engineers hang out there too. Friendly bunch.
-----Original Message-----
From: WBMfg Website
Sent: Tuesday, December 23, 2014 12:01 PM
To: WBMfg
Subject: WBMfg Website Comment/Feedback
12/23/14 12:01 PM john f ockert [email protected] 4174342384 we purchased
your epmp Omni conversion kit. I followed the directions. I have great
downlink modulation and capacity and quality from ap to subscribers but the
uplinkf from subscribers to the ap is poor most of the time. it isn't
interference and it isn't aming the subscriber units. is there something
wrong with the Omni. we have one tower with sectors and decided that we
would use an Omni on another to see how it preformed. so far not so good.
have you seen anything else like this. any help would be appreciated.
