He'll have a hard time with that if he has zero customers as he won't be able to justify an IPv4 allocation. Of course, you could always start with IPv6. :)
On Tue, Jan 6, 2015 at 9:44 PM, Ken Hohhof <[email protected]> wrote: > Oh, that brings up another point. If at all possible, get your own > public IP address space and autonomous system number. And don’t NAT a > bunch of customers to one public IP. > > > *From:* Jerry Richardson <[email protected]> > *Sent:* Tuesday, January 06, 2015 8:22 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] New WISP > > A big one is to know where your bandwidth will come from, initially and > when you need more. If possible a source that can be increased as needed as > changing ISPs is a huge PITA > > > > Jerry Richardson > airCloud Communications > > On Jan 6, 2015, at 5:16 PM, [email protected] wrote: > > Have high installation standards - good signal level, well-attached > mounts and cabling, everything high is grounded, and don't use > temporary/weird/hard-to-access wood poles or popups. No exceptions to those > since almost every one will bite you in the butt later, some of our > competitors and super-cheap wifi guys and many of the times we swap > customers a complete reinstall is required. > ------------------------------ > *From: *Trevor Bough <[email protected]> > *Sender: *"Af" <[email protected]> > *Date: *Wed, 7 Jan 2015 00:21:09 +0000 > *To: *<[email protected]> > *ReplyTo: *[email protected] > *Subject: *[AFMUG] New WISP > > > Hi guys, long time listener, first time caller. I'm looking at starting a > new rural WISP and was wondering if you guys could share some of the things > you wish you had known when you started out. Things to absolutely stay away > from, things that you didn't think of first, but made your life 10x easier, > etc. Any info would be greatly appreciated! > >
