I have several 5GHz 450 APs co-located within a foot or two of Canopy
900 stuff. Works fine as far as I can tell.
On 1/15/2015 7:13 PM, Andreas Wiatowski wrote:
Doubt it will�I�m suspecting that the board is leaking RF. We have
another 450 in the same vicinity�no issues. I just wanted to see if
anyone else has ever seen this. It is powered by CMM4.
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
519-449-5656 x-600
From: Josh Luthman <[email protected]
<mailto:[email protected]>>
Reply-To: "[email protected] <mailto:[email protected]>"
<[email protected] <mailto:[email protected]>>
Date: Thursday, January 15, 2015 at 8:09 PM
To: "[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
Subject: Re: [WISPA Members] 450 5GHZ - Brings down Cambium PMP900Mhz
subs - leaky radio???
Plug in the 450 on the ground and see if it happens.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Jan 15, 2015 8:05 PM, "Andreas Wiatowski" <[email protected]
<mailto:[email protected]>> wrote:
Today we added a 450 Sector to an elevator. It is about 6 ft. away
from a Cambium 900 AP. About 50% of the subscribers far away from
the tower disconnect. Weird!!! We though it was power, so we
powered off another 450 that is on the same leg before powering up
the offending AP. Same issue.
Has anyone seen this before�we are perplexed.
BTW- I can�t seem to post to the AF list. Successfully subscribed
and unsubscribed�. that�s weird too! ;.>
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
519-449-5656 x-600 <tel:519-449-5656%20x-600>
--
_______________________________________________
Members mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/members
_______________________________________________
Members mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/members
