I think you need to isolate based on other discussions. Not certain. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 15, 2015 8:32 PM, "Jeremy" <[email protected]> wrote:
> Meanwell it is. Another question...on another site I have a -48v > rackmount power supply. If I reverse it can I power the AF or do I need to > isolate it? Would I be better off just using the POE that comes with it? > > On Thu, Jan 15, 2015 at 6:05 PM, Josh Luthman <[email protected] > > wrote: > >> Different model than mine I suppose, every Meanwell you can get an l >> bracket and aluminum din clip. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Jan 15, 2015 8:02 PM, "Ken Hohhof" <[email protected]> wrote: >> >>> Not natively, I guess you could MacGyver it, but the input and output >>> are on opposite ends, and there aren’t convenient holes to attach a DIN >>> rail clip. You could look in the Mean Well catalog and see if they list a >>> DIN rail adapter bracket for it. I just screw it to the backplate. >>> >>> *From:* Josh Luthman <[email protected]> >>> *Sent:* Thursday, January 15, 2015 6:58 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] Power AF24 with GIGE-POE-APC - 24v-48v DC-DC >>> >>> >Mean Well RSD 200W >>> >>> Looks DIN rail to me... >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Thu, Jan 15, 2015 at 7:56 PM, Ken Hohhof <[email protected]> wrote: >>> >>>> I just bite the bullet and use a Mean Well RSD 200W unit, it’s >>>> overkill, and not DIN rail, but it works good. >>>> >>>> The other solution that comes to mind is a 24V to 24V converter with >>>> isolated output, then stack the output on the existing 24V. >>>> >>>> It appears that Sola makes one, or there’s this very pricey 240W beast >>>> from Phoenix Contact: >>>> http://www.alliedelec.com/search/productdetail.aspx?SKU=70239258 >>>> >>>> >>>> >>>> *From:* Jeremy <[email protected]> >>>> *Sent:* Thursday, January 15, 2015 6:27 PM >>>> *To:* [email protected] >>>> *Subject:* [AFMUG] Power AF24 with GIGE-POE-APC - 24v-48v DC-DC >>>> >>>> I don't want to use the Tycon AF24 24-48V POE because it doesn't >>>> offer surge suppression, and it is another big plastic box. All of our >>>> sites are already standardized on GIGE-POE-APC surge/injectors. They are >>>> 24v sites. I need a decent 24-48V upconverter, preferably DIN mount, that >>>> has enough juice to power the AF24. Is anyone using a similar setup? >>>> Recommended products? >>>> >>> >>> >> >
