I usually run split files, but this task requires the whole thing. Finally did what I needed to do and it turned out I missed the data I was looking for anyway
On Wed, Jan 21, 2015 at 1:27 PM, Charles Boening <[email protected]> wrote: > Could split the file into smaller components with this. > > https://www.wireshark.org/docs/man-pages/editcap.html > > > > Check this out too. > > http://www.netresec.com/?page=SplitCap > > > > > > > > __________________________________ > > > > *Charles Boening* > > *Network Manager* > > 800-858-2399 | Office > > [email protected] > > > > www.cot.net | Find us on Facebook > <https://www.facebook.com/pages/Cal-Ore/205066716227707> > > __________________________________ > > *Cal-Ore* | *Real. Local. Trusted. Professional.* > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *That One Guy > *Sent:* Wednesday, January 21, 2015 10:51 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] Windows based pcap viewer for large files > > > > 8gb and 4 xeon cores > > > > On Wed, Jan 21, 2015 at 12:33 PM, Josh Luthman < > [email protected]> wrote: > > How much ram do you have? Do a filter and save that? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jan 21, 2015 1:32 PM, "That One Guy" <[email protected]> wrote: > > Anybody know a good, free viewer for large pcaps that runs in windows? > > > > I have a 16gb file in wireshark right now and everythign takes 10 minutes > to complete > > > > > -- > > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 > > > > > > -- > > All parts should go together without forcing. You must remember that the > parts you are reassembling were disassembled by you. Therefore, if you > can't get them together again, there must be a reason. By all means, do not > use a hammer. -- IBM maintenance manual, 1925 > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
