I've been 100% fine with 100 meg and CMM sync from the gig syncinjector. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2015 10:18 AM, "Nate Burke" <[email protected]> wrote:
> It's been a couple months, but I think It persisted with 1G and 100m, I > do have it set to 100m now, but I'm pretty sure to get it to completely > clear up, I had to disable the Sync on the Sync Injector. > > > On 1/30/2015 9:14 AM, Josh Luthman wrote: > > Was it gig? I had gig problems all over so I just set my rb2011 to 100 > meg. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Jan 30, 2015 10:12 AM, "Nate Burke" <[email protected]> wrote: > >> I have the Puck deployed on all radios. I have 1 site that is Syncing >> off the Puck, but powered via a sync injector. I was having ethernet >> issues (interface bouncing/negotiation) until I disabled Sync on that port >> in the Sync Injector. It's been fine since. >> >> >> On 1/30/2015 9:07 AM, Paul McCall wrote: >> >> We are installing both and using CMM, CTM, SyncInjectors until >> something stops working S.O.P. and then have the pucks to use to get us >> by. Saved us many tower climbs already. As a rule, we keep the back to >> back APs on the same sync source (SOP or puck) and that seems to work fine, >> even with the other 2 back to back APs on the original SOP sync source. >> >> >> >> Paul >> >> >> >> *From:* Af [mailto:[email protected] <[email protected]>] *On >> Behalf Of *Josh Baird >> *Sent:* Friday, January 30, 2015 9:23 AM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Epmp sync ? Sync injector or puck? >> >> >> >> So Cambium is basically telling people not to use SyncInjectors? Funny. >> >> >> >> I haven't heard that one before. >> >> >> >> Josh >> >> >> >> On Fri, Jan 30, 2015 at 9:15 AM, Darren Shea <[email protected]> wrote: >> >> TJ, >> >> We’ve seen occasional issues with the ePMP APs in the field losing the >> sync-over-power pulse from SyncInjectors and CTM-2Ms, and Cambium responded >> to my trouble ticket with the following: “There has been extensive >> discussion/testing here regarding supported/compatible third party >> Sync/power sources for ePMP APs. We noticed sync compatibility issues when >> using packetflux sync injectors.” >> >> >> >> My advice is to deploy with the puck antenna and use it as your primary >> sync source, and keep the SyncInjector oprerational as a backup. The >> onboard GPS seems to be stable, and appears to be less likely to make your >> customers call you complaining, “the Internet is down!” >> >> >> >> - Darren >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *TJ Trout >> *Sent:* Thursday, January 29, 2015 8:23 PM >> *To:* [email protected] >> *Subject:* [AFMUG] Epmp sync ? Sync injector or puck? >> >> >> >> Any advantges to using sync Injectors or Cmm for epmp or is the puck just >> as good ? >> >> >> >> >> >
