We updated the firmware to 13.3 and the problem disappeared. I find that odd as the link has been working fine for about 6 weeks until yesterday.
On Feb 10, 2015, at 5:50 PM, Forrest Christian (List Account) <[email protected]> wrote: > As others have mentioned, this is most likely interference from a hpol canopy > radio. > > The two radios are getting in and out of sync with each other. > > On Feb 10, 2015 8:51 AM, "Dan Petermann" <[email protected]> wrote: > A client of mine has a PTP450 link. It is re-registering like crazy, like > every 30 seconds or so. > > The spectrum is clean (the portion it is running in), RX is -68 on both ends. > > The really odd part is this: If you watch the S/NR on the slave, the H pol > will start around 23db, slowly climb to 30 then the radio will dump and > re-register. The V pol stays constant at 25dB S/NR. > > I have not tried newer firmware. The link is running 12.something (I think). > > Any ideas?
