I never set ACK. Anywhere. On any device. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 12, 2015 7:49 PM, "John Woodfield" <[email protected]> wrote:
> Half-way correct. Legacy devices must have at least 4.0.1 -and- static ACK > set. Auto-ack and they will not pass data. > > > > Also found that with legacy devices you want to use station instead of > station-wds and ap-wds at the AP. Doesn't make any sense, never understood > it. > > > > > > > > John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) > 708-1937 > > > > -----Original Message----- > From: "Josh Luthman" <[email protected]> > Sent: Thursday, February 12, 2015 6:53pm > To: [email protected] > Subject: Re: [AFMUG] Getting UBNT Non M series SM's to connect to an M > series AP.? > > Upgrade non M to 4.0.1 and they'll talk AirMax to an M ap. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Feb 12, 2015 6:51 PM, "timothy steele" <[email protected]> > wrote: > >> Turn Airmax off >> >> — >> Sent from Mailbox <https://www.dropbox.com/mailbox> >> >> >> On Thu, Feb 12, 2015 at 6:48 PM, Sam Lambie <[email protected]> >> wrote: >> >>> Is this even possible? I have been dinking with an AP and SM here on >>> the bench for a while and can't get them to talk. The other way around, no >>> problem. >>> >>> Trying to not have to do a mass swap of SM's in order to upgrade an AP >>> if I can get away with it. >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >>
