Re: [AFMUG] PTP650 CCQ?

[Roland Houin]

I don't see packets dropping unless you reach the capacity limit. in noisy environments the capacity will fluctuate quickly.. that's why we monitor so we can tell when we reach the capacity.   roland   > How do you know if your dropping packets or is that part of the PTP650 magi that they just don't? Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 On Wed, Feb 18, 2015 at 9:35 AM, Roland Houin <rho...@fourway.net> wrote: my experience is that you get the throughput that is shown in link capacity.. real/tcp/udp however you measure it.. I monitor throughput up/down as well as rssi to determine link status. never had to look at the other statistics, except ethernet for crc errors.. Roland > Put up my first PTP650 link yesterday, what should I be looking for in the statistics under the wireless port counter to determine if I am having problems with this link? I'm used to the Atheros radios and CCQ value but this is a whole different breed here. I attached a couple screenshots. Link capacity is listed as 417mbps. Does that number mean I will actually see 417mbps of aggregate traffic on this link? I did some testing last night and actually seen 325mbps TCP throughput in the downlink direction. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820 http://www.wavelinc.com tel. 419-562-6405 fax. 419-617-0110 < <