I have a 450 that was very recently put up in place of a 430AP. 16/22
Customers are 430s in Interop mode, the rest are 450s.
What can I expect as maximum throughput? I was sort of expecting
greater or equal performance to a 430, but I've had a lot of odd feeback
from customers since we switched this over from a 430 AP to a 450AP with
mostly 430SMs.
I only have one Microtik at a customer location that I can do a
bandwidth tests too but it's a rate limited SM, so its a little hard to
gauge based on that alone. Most of the time it seems like there should
be plenty of bandwidth available, but just getting too much odd feedback
to not check out all the possibilities.
The bandwidth usage charge also tracks a falling utilization over the
past few weeks. I've gone from seeing peaks at 22-24mpbs to peaks at
12-15mbps. Nothing should have changed out there as far as usage, I'd
still be expecting to see something in the neighborhood of 22-24 on
average. If anything it should be pushing more as the schools are all
off for a week.
Does anyone have any sort of clear info on what we should be expecting
here?
-- Samuel Kirsch, Network Support
Plexicomm - Internet Solutions | www.plexicomm.net
Office: 1.866.759.4678 x109 | Fax: 1.866.852.4688
Emergency Support: 1.866.759.9713 | [email protected]
