Im having the boss order some of those and the wider DINM15V2-RC, are they pretty versatile?
On Fri, Feb 20, 2015 at 12:48 PM, Jeremy <jeremysmi...@gmail.com> wrote: > I use these http://www.winfordeng.com/products/dinm12-15.php > > > The 12RC are skinny (like 3/4") > > On Fri, Feb 20, 2015 at 11:21 AM, That One Guy <thatoneguyst...@gmail.com> > wrote: > >> We have been using these to adapt things: >> http://www.winfordeng.com/products/dinm01.php >> [image: Inline image 1] >> I screw a hoseclamp to them for mounting power supplies and other loose >> things >> >> The things I dont like about them is they only accept screws through the >> front, and rammy installers shatter them in the winter. Theyre also pretty >> small so mounting anything with weight is suspect. >> >> I dont want 5 dollar clips, those I can get on per needed basis, I just >> want to find something a little bit heftier with the ability to run screws >> in from the other side to have on hand all the time >> >> >> >> >> -- >> All parts should go together without forcing. You must remember that the >> parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >> > > -- All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. -- IBM maintenance manual, 1925
