What's obvious? Installer fills out the completion form with the image and I can't find it anywhere I go under jobs and it just shows a broken image icon
— Sent from Mailbox On Mon, Feb 23, 2015 at 6:30 PM, Josh Luthman <[email protected]> wrote: > Uhm iirc it's pretty obvious dir. > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Feb 23, 2015 3:19 PM, "That One Guy" <[email protected]> wrote: >> open a support ticket with them. I never have found out where type file >> goes >> >> On Mon, Feb 23, 2015 at 2:59 PM, timothy steele <[email protected]> >> wrote: >> >>> i have it set to photo/image but it just shows up as a broken image icon >>> >>> On Mon, Feb 23, 2015 at 3:47 PM, That One Guy <[email protected]> >>> wrote: >>> >>>> the images fo to completion info on the jobs section as along as you >>>> have it set to type photo. If you have it set to file they go to the nether >>>> >>>> On Mon, Feb 23, 2015 at 2:42 PM, timothy steele < >>>> [email protected]> wrote: >>>> >>>>> in powercode you can have the completion form include a PIC but after >>>>> uploading from my phone and completing job the image shows broken anyone >>>>> have any idea's what I need to do for this to work? >>>>> >>>>> phone is a samsung galaxy S3 >>>>> >>>>> http://www.powercode.com/forum/index.php/topic,3110.0.html >>>>> >>>>> >>>>> Thanks, >>>>> >>>> >>>> >>>> >>>> -- >>>> All parts should go together without forcing. You must remember that the >>>> parts you are reassembling were disassembled by you. Therefore, if you >>>> can't get them together again, there must be a reason. By all means, do not >>>> use a hammer. -- IBM maintenance manual, 1925 >>>> >>> >>> >> >> >> -- >> All parts should go together without forcing. You must remember that the >> parts you are reassembling were disassembled by you. Therefore, if you >> can't get them together again, there must be a reason. By all means, do not >> use a hammer. -- IBM maintenance manual, 1925 >>
