So you had AutoSync + FreeRun and it was stuck in FreeRun? I've seen
that on every 3GHz AP that has it enabled (single AP sites). Ended up
shutting it off on all of them. But 2.4/5GHz running 13.2/13.2.1 seems
to work fine with it enabled. It's just 3GHz with weird, random timing
issues. Methinks it has something to do with LBT being in the mix,
because other than that, it's the same hardware/FPGA. I wanted to go
back to 13.1.3, but losing MIMO-A is not an option now that I have SM
links that need it occasionally, a few frequently. Variable multipath
doesn't go away even in the winter.
BTW, these are a mix of SyncInjectors and Parasitic pipes. No different
than 2.4 and 5GHz.
On 3/8/2015 9:10 AM, Ken Hohhof wrote:
I think I found the cause – one of George’s favorite problems, another
AP 10 miles away was on free run despite having sync over power.
Problem occurred about every 8 hours. Reboot of the free running AP
fixed that.
It would still be nice to have a Cambium-ese to English dictionary.
*From:* That One Guy <mailto:[email protected]>
*Sent:* Saturday, March 07, 2015 10:45 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] SM session log message dictionary?
I don't think cambium bought that list from moto which doesn't matter
because they didn't have one anyway. I think some coder generated that
component, but then died of a caffien overdose before documenting it
On Mar 6, 2015 6:34 PM, "Ken Hohhof" <[email protected]
<mailto:[email protected]>> wrote:
Are you doing authentication?
No. But this is a 3.65 SM if that matters.
-----Original Message----- From: George Skorup (Cyber
Broadcasting) Sent: Friday, March 06, 2015 6:28 PM To:
[email protected] <mailto:[email protected]> Subject: Re: [AFMUG] SM session
log message dictionary?
To max error I think means the SM has tried to register with the
AP so many times and it failed, so it gives up and starts scanning
again. I don't think I've seen SMREGGNTREG before. Are you doing
authentication?
On 3/6/2015 5:52 PM, Ken Hohhof wrote:
Is there a table of Canopy log messages and what they mean in
English? I can't find one in the user guide.
For example, OOSERVICE and REGISTERED are self explanatory,
but what does REGREQTOMAXERR or SMREGGNTREJ mean? The first
one sounds like maybe registration request and whatever
TOMAXERR means. The second sounds like SM registration grant
reject or something along those lines.
03/06/2015 : 21:35:55 UTC : Event: SMSESFAIL, MsgType:
REGREQTOMAXERR, NewState: OOSERVICE, Flag 0
03/06/2015 : 21:36:33 UTC : Event: SMSESACTIVATE, NewState:
REGISTERING, Flag 0
03/06/2015 : 21:36:33 UTC : Event: SMSESFAIL, MsgType:
SMREGGNTREJ, NewState: OOSERVICE, Flag 1
03/06/2015 : 21:37:19 UTC : Event: SMSESACTIVATE, NewState:
REGISTERING, Flag 0
03/06/2015 : 21:37:22 UTC : Event: SMSESMSG, MsgType:
REGREQTO, NewState: REGISTERING, Flag 0
repeated 1 times
03/06/2015 : 21:37:27 UTC : Event: SMSESFAIL, MsgType:
REGREQTOMAXERR, NewState: OOSERVICE, Flag 0
03/06/2015 : 21:38:13 UTC : Event: SMSESACTIVATE, NewState:
REGISTERING, Flag 0
03/06/2015 : 21:38:13 UTC : Event: SMSESINS, NewState:
REGISTERED, Flag 21
03/06/2015 : 21:38:13 UTC : Event: SMAUTHORMSG, NewState:
REGISTERED, Flag 0
repeated 2 times
