I get it. Don't do retro text drawings because the AWS gods will slap
you silly.
So what I want to do is reverse the inside bracket (as shown in the top
of this image), and move the U-bolt to the outside. I can accomplish
most of the desired result by using two of these pipe-to-pipe clamps.
bp
<part15sbs{at}gmail{dot}com>
On 3/10/2015 1:33 PM, Chuck McCown wrote:
I know folks that have reversed the clamp and put M-TOWs on angle iron.
Can�t visualize the drawing.
*From:* Bill Prince <mailto:[email protected]>
*Sent:* Tuesday, March 10, 2015 2:24 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Another new product for you!
What issues would there be reversing the bracket?� Reason I ask is
that we have a couple of towers built with angle iron that are also
sloped.� Turning the outer clamp parts around is a fairly common way
to deal with this (like the text drawing below), and it would still
allow a round pipe on the outside.
��� |��� |
� �� \ �� \
���� /� � /
��� |��� |
bp
<part15sbs{at}gmail{dot}com>
On 3/10/2015 1:11 PM, Chuck McCown wrote:
Enjoy.
