Personally I order GigEAPC-HV only. Works with them all and it's a similar price as the other ones.
Note you *HAVE* to have HV for poe, non HV works for just ethernet and no voltage. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Mar 11, 2015 at 2:59 PM, Kurt Fankhauser <[email protected]> wrote: > Oh I see, so this one http://wbmfg.com/products.cfm?PID=61 is compatible > with ever radio that has ever been powered by POE? So if I order this one I > wont need to order anything else? > > > Kurt Fankhauser > > Wavelinc Communications > > P.O. Box 126 > > Bucyrus, OH 44820 > > http://www.wavelinc.com > > tel. 419-562-6405 > > fax. 419-617-0110 > > On Wed, Mar 11, 2015 at 2:22 PM, Chuck McCown <[email protected]> wrote: > >> Yeah the 444 is Canopy 4 wire data 4 wire power only. It works for >> UBNT 4 wire data products too. Special circuitry to monitor voltage and >> current and different surge voltages on the different wires. >> >> GigE is for 8 wire data protection. >> If you have power on it you want the HV version. I recommend HV for >> everything. I should discontinue the LV version. >> >> *From:* Josh Luthman <[email protected]> >> *Sent:* Wednesday, March 11, 2015 12:02 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] 444-APC work on Airfiber/450 AP's? >> >> You'd want the Gige one. 444apc is for 100mbit only. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Mar 11, 2015 at 1:54 PM, Kurt Fankhauser <[email protected]> >> wrote: >> >>> Does the 444-APC surge protector work on UBNT Airfibers and also 450 >>> AP's? >>> >>> Kurt Fankhauser >>> >>> Wavelinc Communications >>> >>> P.O. Box 126 >>> >>> Bucyrus, OH 44820 >>> >>> http://www.wavelinc.com >>> >>> tel. 419-562-6405 >>> >>> fax. 419-617-0110 >>> >> >> > >
