This is what I picked up: http://www.menards.com/main/electrical/rough-electrical/strut-supports/strut-channel-14-gauge-pre-galvanized-10/p-1628655-c-12477.htm I am using 1 1/2in pipe
Tim From: Af [mailto:[email protected]] On Behalf Of TJ Trout Sent: Thursday, March 12, 2015 2:07 PM To: [email protected] Subject: Re: [AFMUG] as anybody use power/unistrut for tower stand off bracket Use the larger depth strut. Get 1.5" clamps 4 of them for rohn 25, 2 brackets per strut. Then proper size for your mounting pipe. Then it u have any play in it depending on the weight of whatever u mounted u can add a 3rd brace from the remaining leg to mid point on your mounting pipe to really beef it up On Mar 12, 2015 11:01 AM, "TJ Trout" <[email protected]> wrote: Works great and on triangle tower you can add a 3rd brace if needed from an angle On Mar 12, 2015 10:48 AM, "Josh Luthman" <[email protected]> wrote: It's galvanized... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 12, 2015 1:44 PM, "That One Guy" <[email protected]> wrote: It works good, but Im leary of it because of the channel holding water and rust On Thu, Mar 12, 2015 at 12:41 PM, Josh Luthman <[email protected]> wrote: MTOWP. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 12, 2015 1:40 PM, "Tim Reichhart" <[email protected]> wrote: as anybody used power/unistrut to make an tower stand off bracket before? The reason why I am asking this is because I am getting ready to mount 3 sectors on an tower that is 130 ft up and I see some of them tower stand offs are around 300 dollars per set I cant see spending that much on something like this. Thanks Tim -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
