Ubiquiti does make some 3.65 gear so maybe double check the new guy is not using any of it. If that’s the case, the Purewave guy should make sure he is in the upper 25 MHz where UBNT can’t go.
Another possibility is the PW guy is counting on working with really low signal levels like –90 dBm and he is picking up enough 5 GHz from the new guy to make that impossible. Either the UBNT stuff could have high enough OOBE into 3.65, or the 5 GHz from the UBNT could be hot enough that the PW receiver is getting overloaded. If it’s the latter, the PW guy might need some 3.65 bandpass filters. Then there are less likely explanations like PIM. From: Jaime Solorza Sent: Tuesday, March 17, 2015 12:11 PM To: Animal Farm Subject: Re: [AFMUG] Question on interference That issue doesn't involve me. The wisp I am helping out had his gear up for long time. Then Purewave Cambium guy sets up. No issues. . New guy sets up few weeks ago...issues. Jaime Solorza On Mar 17, 2015 10:58 AM, "Josh Luthman" <[email protected]> wrote: In a different band? Can you tell them to prove it or lose it? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 17, 2015 12:50 PM, "Jaime Solorza" <[email protected]> wrote: In this case Purewave user claiming Ubiquiti gear causing him problems. I was up there for a third WISP having issues. Three WISPs on same site using Canopy Ubiquiti Cambium and Purewave gear...lots of 5 GHz noise. Jaime Solorza On Mar 17, 2015 10:37 AM, "Mark Radabaugh" <[email protected]> wrote: On 3/17/15 12:19 PM, Jaime Solorza wrote: The Nanobridges and Rockets on left off side of tower were installed rwo weeks ago and now the WISP with the Purewave gear is complaing about interference. The Ubiquiti gear is all 5ghz and Purewave gear is 3.65ghz Is Purewave converting from 5ghz to 3.65? Jaime Solorza Purewave 3.65 to my knowledge is native to 3.65. It does not interfere with 5x gear that I have ever noticed. The tower I have them mixed on have Canopy 900, 3.65 and 5.7 FSK and OFDM and have not seen any interference. Mark -- Mark Radabaugh Amplex [email protected] 419.837.5015 x 1021
