If that was on my network that would be replaced immediately. There is something wrong with that hardware. We do not have these problems. Wether it's a $30 dollar dlink router or a $300 ont. If they lock up with current firmware that get replaced. As for calix stuff it is very rare.
On Mar 18, 2015, at 2:16 PM, Jon Auer <[email protected]<mailto:[email protected]>> wrote: My parents have a Calix indoor ONT. At install time the tech from little local ILEC told them it would lock up from time to time and need to be power cycled. They have to power cycle it (not their router) anywhere from four times a week to twice a month. Very surprised since I've never heard anything bad about Calix. I suspect bad firmware combo/misconfig, but not my network so... On Wed, Mar 18, 2015 at 8:03 AM, Josh Reynolds <[email protected]<mailto:[email protected]>> wrote: Looking for horror stories :) On March 18, 2015 4:38:49 AM AKDT, Craig Schmaderer <[email protected]<mailto:[email protected]>> wrote: We use all of there products. The 700 series onts are rock solid. For residential we now use the 800 series indoor onts with AC routers. What specific questions do you have? On Mar 18, 2015, at 6:00 AM, Chuck McCown <[email protected]<mailto:[email protected]>> wrote: We use the indoor ONTs. They seem to work perfectly fine. -----Original Message----- From: Josh Reynolds Sent: Tuesday, March 17, 2015 8:28 PM To: [email protected]<mailto:[email protected]> ; [email protected]<mailto:[email protected]> Subject: [AFMUG] calix 726GE ONT Is anybody here using Calix 726GE ONTs or similar models? What has been your experience with them? Offlist replies are fine. Thanks -- -- Josh Reynolds CIO, SPITwSPOTS www.spitwspots.com<http://www.spitwspots.com> -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
