Good info! Thanks guys! ___________________________ Mangled by my iPhone. ___________________________
Tyler Treat Corn Belt Technologies, Inc. [email protected]<mailto:[email protected]> ___________________________ On Mar 28, 2015, at 1:46 PM, Mike Hammett <[email protected]<mailto:[email protected]>> wrote: I've never heard of a properly programmed generic SFP not presenting all DDM information to Cisco. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "Chuck McCown" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Saturday, March 28, 2015 1:44:12 PM Subject: Re: [AFMUG] Cisco CWDM-mux-8 There is something special embedded in Cisco SFPs that the equipment can detect. Generic SFPs can be detected. Kinda like a generic non HP print head in an HP printer. From: Mike Hammett<mailto:[email protected]> Sent: Saturday, March 28, 2015 12:41 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Cisco CWDM-mux-8 Cisco gear doesn't know jack difference if you program the SFP properly. ;-) ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "Chuck McCown" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Saturday, March 28, 2015 1:28:39 PM Subject: Re: [AFMUG] Cisco CWDM-mux-8 Don't count on non cisco branded SFP to be able to give you all the data metrics like RX power TX power etc. Cisco gear knows when it is not talking to its own stuff and will refuse to give you full features. -----Original Message----- From: Seth Mattinen Sent: Friday, March 27, 2015 8:04 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Cisco CWDM-mux-8 On 3/27/15 6:13 PM, Tyler Treat wrote: > Hey folks. Another department has a Cisco CWDM-mux-8 running on a link > out to a secondary site. > What do we need to utilize this for our own link - will any SFP be able to > transmit through it and come out the other end appropriately? No, you need CWDM SFPs in the right wavelengths, standard non-colored optics will not work. See the list in Table 3 here: http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/cwdm-transceiver-modules/product_data_sheet09186a00801a557c.html You don't need to use a Cisco-branded SFP, any with the right wavelengths will work. ~Seth
