+1! -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Sunday, March 29, 2015 2:49 PM To: af@afmug.com Subject: Re: [AFMUG] 11Ghz Licensed Gear
If Tim is wrong about something like that, we all have problems... -----Original Message----- From: Jeff Broadwick Sent: Sunday, March 29, 2015 12:08 PM To: af@afmug.com Subject: Re: [AFMUG] 11Ghz Licensed Gear You are correct Tim: http://blog.aviatnetworks.com/2012/08/06/fcc-rule-changes-lower-the-cost-of-microwave-deployments/ Regards, Jeff Jeff Broadwick Senior Account Manager, Convergence Technologies, Inc. jbroadw...@converge-tech.com 312-205-2519 Office 574-220-7826 Cell -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Hardy, Tim Sent: Friday, March 27, 2015 4:13 PM To: af@afmug.com Subject: Re: [AFMUG] 11Ghz Licensed Gear Can't go below 3' at 6 GHz.. -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jeff Broadwick Sent: Friday, March 27, 2015 4:05 PM To: af@afmug.com Subject: Re: [AFMUG] 11Ghz Licensed Gear What sort of throughput are you looking for Matt? You can't go below 2' dishes with 6GHz and with that distance, the dish size will be a significant factor in determining throughput. Regards, Jeff Jeff Broadwick Senior Account Manager, Convergence Technologies, Inc. jbroadw...@converge-tech.com 312-205-2519 Office 574-220-7826 Cell -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt Sent: Friday, March 27, 2015 3:50 PM To: af@afmug.com Subject: Re: [AFMUG] 11Ghz Licensed Gear This is a 10 mile hop in USA. Would like to stay at 2 foot dishes or even 18 inch on one end. Limited tower space on one end of link. On Fri, Mar 27, 2015 at 10:19 AM, Daniel White <afmu...@gmail.com> wrote: > SAF does 24GHz too. > > If you have Lumina... Integra is a nice step up (performance wise, GUI > wise, feature set wise). Also Integra 24GHz is the only radio > certified for use with 4ft antennas in the unlicensed band (and that > goes for Canada too) :-) > > ********************************************************************** > ***** > Daniel White - Managing Director > SAF North America LLC > Cell: +1 (303) 746-3590 > daniel.wh...@saftehnika.com > Skype: danieldwhite > Social: LinkedIn > > ********************************************************************** > ***** > >> -----Original Message----- >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rory Conaway >> Sent: Friday, March 27, 2015 10:09 AM >> To: af@afmug.com >> Subject: Re: [AFMUG] 11Ghz Licensed Gear >> >> Instead of making it licensed, if it's short, why not use 24GHz? >> >> Rory >> >> -----Original Message----- >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt >> Sent: Friday, March 27, 2015 7:48 AM >> To: af@afmug.com >> Subject: [AFMUG] 11Ghz Licensed Gear >> >> Looking at updating a short 5Ghz link to licensed. In past we have >> used SAF and pretty happy with it. What other affordable gear is out >> there now? >