Strangely, the unaffected connection is blasting through trees (unsure
that it will hold in the summer), further from the AP.
The affected connection has LOS.
On 3/31/2015 11:05 AM, Jon Langeler wrote:
Are these LoS or through trees?
Sent from my iPhone
On Mar 31, 2015, at 11:27 AM, Brian Sullivan
<[email protected] <mailto:[email protected]>> wrote:
Thanks for the feedback. We aren't using dielectric, but do use the
butyl / Super88. Both sets of connectors face down, so I would be
really surprised if water got in the cables. It baffles me that one
connection remains good while the other tanks.
On 3/30/2015 11:13 AM, Chuck Hogg wrote:
I've seen this happen in other frequencies/situations, and it is
usually water in the cable. Do you use dielectic grease on the RF
side? We started doing that a long time ago and have not had these
types of issues since.
Regards,
Chuck
On Mon, Mar 30, 2015 at 11:41 AM, Bill Prince <[email protected]
<mailto:[email protected]>> wrote:
We're using an Alpha omni on PMP450, but 2.4 GHz. We have not
seen any significant change in weather other than when trees are
in the way.
bp
<part15sbs{at}gmail{dot}com>
On 3/30/2015 8:14 AM, Brian Sullivan wrote:
I deployed a 3.65 Omni antenna attached to a 450AP about 2
weeks ago. Two SM's on it that are geographically opposite
from each other (one faces West, the other East). Two minor
rain events have happened since, and each time the West
facing SM loses >10dB. A day or two after the first rain
event the connection cleared up on it's own. The SM facing
East is unaffected.
Under the radome of this Omni, I assume there are four 90
degree antennas. Is it possible water is penetrating the
omni and affecting only one side?
