Sounds like an AP losing GPS sync for whatever reason could let the magic
smoke out of all 8 of your APs? That's a scary thought.
-----Original Message-----
From: Peter Kranz
Sent: Monday, April 20, 2015 6:43 PM
To: [email protected]
Subject: Re: [AFMUG] ET Industries beamforming antennas
This is a complicated issue.. It depends on how much isolation exist between
ports on the ETI beam forming network. For the ETI BFN I use, you cannot
have one radio in transmit at the same time another radio is in receive
because you may exceed the allowable RF energy into the PMP450 per the
PMP450 spec. I can share the bloody details if someone gets to this point
and wants more.
So this means you cannot run an AP spectrum analysis due to the other radios
being in transmit mode. This one of the reasons I would like to see synced
PMP450 spectrum analysis where it respects the listen windows.
There are other ETI BFNs have higher port to port isolation than the one I
use, and might not have this problem.
Peter Kranz
www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-0000
[email protected]
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of Tushar Patel
Sent: Monday, April 20, 2015 4:37 PM
To: [email protected]
Subject: Re: [AFMUG] ET Industries beamforming antennas
I remember talking to ET, wasn't there some restrictions on ap can't be put
as spectrum analyzer?
Tushar
On Apr 20, 2015, at 1:15 PM, Peter Kranz <[email protected]> wrote:
I have an 8 radio ETI PMP450 deployment up currently. Details in that
review (2-parts) I posted.
Peter Kranz
www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-0000
[email protected]
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds
Sent: Monday, April 20, 2015 11:03 AM
To: [email protected]
Subject: Re: [AFMUG] ET Industries beamforming antennas
The quote we received was very do-able. Roughly $6,500. If they work we'll
buy a lot more.
Josh Reynolds
CIO, SPITwSPOTS
www.spitwspots.com
On 04/20/2015 09:54 AM, Adam Moffett wrote:
I met with the company in New Jersey. Everything sounded awesome. We
never pulled the trigger because they were a bit too large and a bit
too expensive.
I imagine you're in the same spot.
On 4/20/2015 1:48 PM, Josh Reynolds wrote:
Does anybody here have experience with these?
Hit me up off list.
Thanks
