Whoops, damn Canopy. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On May 3, 2015 10:20 PM, "George Skorup (Cyber Broadcasting)" < [email protected]> wrote:
> Uh... 169.254.1.20 is the default. > > On 5/3/2015 9:12 PM, Josh Luthman wrote: > > 169.254.1.1 > > Daisy chain all expansion stuff. Doesn't matter otherwise. > > Sync needs a daisy chained cat5 cable. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On May 3, 2015 10:03 PM, "Brandon Yuchasz" <[email protected]> wrote: > >> I am probably overlooking some document somewhere but I can’t seem to >> find the info and I would like to install this tomorrow at a site. This is >> the first unit I have had so I am not familiar with it. Is there a default >> IP address to access the Sitemonitor units with so I can assign it an IP >> on our network? Also I want to use it to control a set syncinjectors. Does >> it matter what expansion IO port I plug into on the syncinjector? Will I be >> able to see both the sync injectors through the daisy chain 8 pin giving >> the second unit GPS or do I need to do a 6 pin expansion cable between the >> two syncinjectors? Again does the port matter? >> >> >> >> Final question can I steal power off one of the sync injectors power >> supplies or does this unit need its own? >> >> >> >> Thanks guys. If I can put it in tomorrow I will otherwise I can wait >> until the next visit in a week or so. >> >> >> >> Brandon >> >> >> > >
