Yeah... rocks kind of spoil it. The dirt around here is generally to hard
to push them in by hand without water.

On Wed, May 20, 2015 at 4:08 PM, Craig House <cr...@totalhighspeed.net>
wrote:

> Not here I can spend 30 minutes trying to drive a ground rod and generally
> bend them up before I get them as deep as I had planned
>
> Sent from my iPhone
>
> On May 20, 2015, at 16:04, Chuck McCown <ch...@wbmfg.com> wrote:
>
>  Yeah, until you hit a rock.  In moist dirt you can even lean on them and
> put them in by hand without any water.
>
>  *From:* Mathew Howard <mhoward...@gmail.com>
> *Sent:* Wednesday, May 20, 2015 2:47 PM
> *To:* af <af@afmug.com>
> *Subject:* Re: [AFMUG] Ground Rod Driver
>
>  An electrician once showed me how to install ground rods using nothing
> but a cup of water... not the fastest way, but it did work.
>
> On Wed, May 20, 2015 at 3:36 PM, Chuck McCown <ch...@wbmfg.com> wrote:
>
>>   I always used a lineman’s hammer:
>> http://www.amazon.com/Estwing-E3-40L-EstWing-Linesman-hammer/dp/B000LDGBG8
>> Or a hand sledge:
>>
>> http://www.amazon.com/Estwing-MRF3LB-11-Inch-SureStrike-Drilling/dp/B00433SC4Q/ref=sr_1_1?s=hi&ie=UTF8&qid=1432154165&sr=1-1&keywords=hand+sledge
>>
>> For installing ground rods.  Never much of a problem.  Hold the rod with
>> one hand and hammer with the other.
>> Don’t miss.
>>
>>  *From:* George Skorup <geo...@cbcast.com>
>> *Sent:* Wednesday, May 20, 2015 2:30 PM
>>  *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] Ground Rod Driver
>>
>>  You get all the good toys.
>>
>> On 5/20/2015 3:28 PM, Chuck Hogg wrote:
>>
>> http://www.stanleyhydraulics.com/products/ground-rod-drivers
>>
>>  Regards,
>> Chuck
>>
>> On Wed, May 20, 2015 at 4:27 PM, Chuck Hogg <ch...@shelbybb.com> wrote:
>>
>>> I've got a hydraulic ground rod driver... I think I ended up getting 2
>>> of them for $300 at auction.  We already have a hydraulic power pack for
>>> other things...so it works well.  It's also specifically for ground rods,
>>> not a rotary drill with an attachment.
>>>
>>>  Regards,
>>> Chuck
>>>
>>> On Wed, May 20, 2015 at 1:28 PM, George Skorup <geo...@cbcast.com>
>>> wrote:
>>>
>>>> Dewalt has a battery operated model. Their HEPA vac models are pretty
>>>> cool too. We have a smaller Makita, but if I was going to buy today, it'd
>>>> be Dewalt.
>>>>
>>>> On 5/20/2015 8:29 AM, Chuck McCown wrote:
>>>>
>>>>  Nevermind.  I would need cordless.
>>>>
>>>>  *From:* Chuck McCown <ch...@wbmfg.com>
>>>> *Sent:* Wednesday, May 20, 2015 7:28 AM
>>>> *To:* af@afmug.com
>>>> *Subject:* Re: [AFMUG] Ground Rod Driver
>>>>
>>>>    How much?
>>>>
>>>>  *From:* Jaime Solorza <losguyswirel...@gmail.com>
>>>> *Sent:* Tuesday, May 19, 2015 9:42 PM
>>>> *To:* Animal Farm <af@afmug.com>
>>>> *Subject:* [AFMUG] Ground Rod Driver
>>>>
>>>>
>>>> Damn thing drove the rod by itself!!!  The ground was not too hard. It
>>>> was pretty cool.
>>>>
>>>> Jaime Solorza
>>>>
>>>>
>>>>
>>>
>>
>>
>>
>>
>
>

Reply via email to