My contractor uses the Case maxisneaker. We have a Ditch Witch 410SDX, it's a bit beefier...but isn't narrow like the Case.
Regards, Chuck On Fri, May 29, 2015 at 6:54 PM, Chris Fabien <[email protected]> wrote: > We've tipped ours over as well, plowing on the crest of a hill and the low > side front tire went into a hole. Luckily they are light enough to tip back > over with a truck and tow strap. > On May 29, 2015 6:43 PM, "Chuck McCown" <[email protected]> wrote: > >> I tipped a maxisneaker over once. Don’t run over a cow turd. >> >> *From:* Chris Fabien <[email protected]> >> *Sent:* Friday, May 29, 2015 4:30 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] Drop Machine Recommendations >> >> >> We use a case maxi sneaker. Pretty happy with it but if you have them set >> up with the narrow tires so they will fit through a gate, they are fairly >> top heavy. Depending on how far you want to pull you may be able to get by >> with a smaller machine. >> On May 29, 2015 5:19 PM, "Jason McKemie" < >> [email protected]> wrote: >> >>> I'm needing something that will plow/pull in 3/4" conduit for customer >>> drops. I'm not doing a huge number of these, so I don't need anything too >>> advanced. The company I have been outsourcing this to is very reasonable, >>> but they're so backed up that I'm going to need to start doing this >>> in-house. Thanks. >>> >>> -Jason >>> >>
