I've got three sectors that were on a tower that was taken out by a straight 
line wind.

I can verify that the sectors work and you can have them, just pay shipping so 
that it doesn't cost me anything. The casing is damaged on the top and the 
bottom but it appears the center structure and antenna are okay. The other 
equipment that was beside it survived the fall, the Routerboards didn't fare so 
well.

A little bit of fiberglass work on the top and bottom and they'll probably be 
fine. They're single polarity, 120* 17dBi sectors.


  ----- Original Message ----- 
  From: Jaime Solorza 
  To: Animal Farm 
  Sent: Friday, June 05, 2015 10:55 PM
  Subject: Re: [AFMUG] Looking for free/cheap old 2.4Ghz gear for amateurradio 
project


  Someone got spanked round here recently using 2377 MHz  for a ptp link from 
bank bldg to warehouse.  Guess who uses that channel.   Dont know what radios 
they were.   2500 to 2700 is packed on other side of river.  Some legal some I 
don't know 

  Jaime Solorza

  On Jun 5, 2015 4:34 PM, "Josh Luthman" <[email protected]> wrote:

    I think I have a Ubnt 120 2.4 sitting in the office

    Josh Luthman
    Office: 937-552-2340
    Direct: 937-552-2343
    1100 Wayne St
    Suite 1337
    Troy, OH 45373

    On Jun 5, 2015 6:32 PM, "Colin Stanners" <[email protected]> wrote:

      I posted this a few months back and got a few "too bad we just threw away 
a bunch of gear" answers so I'm trying again as a reminder. I'm  thinking of 
posting this every 3 months if no one considers it annoying.

      I'm with a group of hams using wifi gear (mostly Ubnt/MT) at 2.3ghz in a
      project to modernize amateur radio communications. We don't have a big 
budget so if anyone has ~2.4ghz Vpol 60-120deg sectors, higher-gain antennas or 
Ubnt/MT/other wifi CPEs available cheap/free, please let me know and we can 
look at shipping.


      Or if any one here is a ham and has the free time to start building 
additional networks (I know that's unlikely) I can answer questions/help.

Reply via email to