I don't buy the ESD wire gimmick. Terminate the foil correctly and it
will work fine.
As much as I hate Primus cable, their shielded ends have been good to
me. Large enough wire channels for the Best-Tronics/Belden 7919A stuff.
The Shireen stuff seems to fit well in them too. I think the last 100 we
ordered were from Baltic. The number on the bag I have is CN1-011-8C5SH.
Says shielded, 3 prong for solid and stranded.
The guys do still use the UBNT ends for installs. Had enough of those
where the pins fall out and over crimp so they end up on an angle and
the mating sucked enough that we got CRC/FCS errors. No more of that on
towers.
On 7/6/2015 5:36 PM, Josh Luthman wrote:
I've used ARC and Ubnt ToughCable RJ45 for a while. They're nearly
identical. I've had great luck with both for the last couple of years.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Jul 6, 2015 at 6:33 PM, Nate Burke <[email protected]
<mailto:[email protected]>> wrote:
I know this might open a can of worms with everyone having their
personal preference. I'm running low on my stock of RJ 45 ends,
and I'm just looking to see what's out there. I was using Emerson
Ends, (32-2098UL, looks like they are now branded as
AIM-Cambridge) both Sheided and Unsheilded, but the price has gone
up about $0.10/end since I last ordered them. I had some very
early Toughcable ends, but wasn't really impressed with them. Are
they worth looking at again? Anything else to look at?
Nate
