I don't know, this is the same machine that I've been using for the past two years updating things. I was on a support session with Cambium today, same machine I was using yesterday, same config and everything and it all of a sudden worked. Nothing changed... :-|
But, at least that A/P is upgraded finally. That was after all the end game. On Wed, Jul 8, 2015 at 12:15 PM, George Skorup <[email protected]> wrote: > You don't need the CNUT HTTP server if you're doing "AP as file server" > for SM auto-update. CNUT opens an FTP session with the AP either for SM > auto-update or to update the AP itself. I suspect Steve has something > between his CNUT machine and the AP that won't update that's screwing up > the FTP session. Maybe the AP or router/switch port is showing CRC/FCS > errors? Some strange NAT or firewall rule somewhere? > > On 7/8/2015 7:38 AM, Wireless Admin wrote: > > If you are using Dude on the same machine or any other program using > port 80 kill that program before starting CNUT since it needs port 80. > Verify CNUT is using the correct� IP address by going into update/http > server configure. I know you said 13.4 firmware which rules out ePMP1000 > but that platform will not work if CNUT is behind NAT.� > > � > > Hope something above helps you. > > � > > Steve B. > > � > ------------------------------ > > *From:* Af [mailto:[email protected] <[email protected]>] *On > Behalf Of *Steve Utick > *Sent:* Tuesday, July 07, 2015 8:36 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Trouble upgrading from 13.4 B7 to 13.4 Release > > � > > I don't know, does the same thing on the A/P and any of the SM's attached > to it.�� They all behave the exact same way.��� > > � > > On Tue, Jul 7, 2015 at 6:33 PM, Bill Prince <[email protected]> wrote: > > We just did a bunch going from 13.4B10 -> 13.4 release. No problems. You > may have a broken radio. > > > bp > > <part15sbs{at}gmail{dot}com> > > � > > On 7/7/2015 4:23 PM, Steve Utick wrote: > > Won't let me downgrade to 13.1.3 either, just sits there transferring > the file forever.�� Seems that once you put the "Beta" software on > something, it's there for life....�� :-| > > � > > On Tue, Jul 7, 2015 at 2:23 PM, George Skorup <[email protected]> wrote: > > Reboot it? If that doesn't help, maybe try downgrading it to 13.1.3 then > upgrade to 13.4? > > > > On 7/7/2015 3:15 PM, Steve Utick wrote: > > I've got a PMP100 A/P that's on 13.4 Beta 7 that I'm trying to upgrade to > 13.4 Release. However, it seems to just hang on Transferring > c40_fskboot.image to host. Posted on the Cambium Forums, but haven't gotten > any answers there.� �Any ideas? > > Thanks. > > � > > � > > � > > � > > >
