fiber.com pre-terminated ends (SC) with pulling eye and furcation tubing. Use Single Mode. Armored if you are concerned about it getting damaged, buy some mule tape (Ebay) and put it through the conduit first, then attach to the pulling eye and pull through.
Erich Kaiser North Central Tower [email protected] Office: 630-621-4804 Cell: 630-777-9291 On Thu, Jul 16, 2015 at 7:54 PM, TJ Trout <[email protected]> wrote: > Anyone able to tell me what type of cable, size of cable (micron), etc, > etc that I need that can withstand a pull of 600-800ft through a continuous > piece of conduit? > > On Thu, Jul 16, 2015 at 5:16 PM, Josh Luthman <[email protected] > > wrote: > >> Preterm with pull eyes and a first tape? >> >> Hopefully you have strain relief points in that 800 ft. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Jul 16, 2015 7:54 PM, "TJ Trout" <[email protected]> wrote: >> >>> I have a project where I need to pull about 800ft of fiber through a 4" >>> continuous conduit that can do 1G with a mikrotik on each side. >>> >>> Never really done any fiber stuff before, what would be the cheapest >>> cable I can use that can withstand the tension of pulling that far? Should >>> I buy a pre terminated cable with pulling eyes or some bulk cable and do a >>> mechanical splice? >>> >>> Thanks! >>> >>> TJ >>> >> >
