Ethernet cable On Jul 23, 2015 3:15 PM, "Craig House" <[email protected]> wrote:
> We have another tower that we have installed 900 FSK equipment on that > seems to be causing problems with a 2 way repeater system. The noise floor > on the 2 way system is 20 db higher when the equipment is on. The down > side to this is the tower owner is the repeater owner and without his > repeater his business suffers and the need for the tower is gone. We have > in the past had this issue and ran coax all the way up the tower to have > only the antennas on top and it solved this issue but I dont want to do > this for a FSK 900 radio? So my question would be, what are the odds that > the new 450 900 mhz that is only moments away from being released would > work without running Coax up the tower? I think this is an issue with the > processor in the FSK board not the RF @ 900mhz that is causing the > problem. What have others done about this. We have another tower that > seems to be on the brink of this same issue as well and I dont want to > completely pull off all 900 FSK but maybe I should? Should I just go to > UBNT 900 until the 450's release? > >
