951 = home router

5 ethernet ports, 1 wireless card - just like every
Netgear/Linksys/Belkin/etc


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Jul 28, 2015 at 6:19 PM, Glen Waldrop <[email protected]>
wrote:

>  If you're talking home routers, not sure.
>
> I use the RB750 line quite a bit, no issues and the POE model is excellent.
>
> The 951 should be functionally the same as the 91x models with extra
> ports. I have quite a few of those in the air with no issues.
>
> My personal network has an RB750 and a reclaimed RB433 as my wireless.
>
>
>
> ----- Original Message -----
> *From:* Dennis Burgess <[email protected]>
> *To:* [email protected]
> *Sent:* Tuesday, July 28, 2015 5:15 PM
> *Subject:* Re: [AFMUG] How many of you guys run MT wireless?
>
>  QRTs and SXTs are the way to go.. J  We also bulid quite a few sectors.
> WE have customers that pefer itelete antennas, and some prefer
> rfelememts..  Some prefer KP antennas as well.  Most of those don’t need
> shied kits as well.
>
>
>
> Dennis Burgess, CTO, Link Technologies, Inc.
>
> [email protected] – 314-735-0270 x103 – www.linktechs.net
>
>
>
> *From:* Af [mailto:[email protected]] *On Behalf Of *Work
> *Sent:* Tuesday, July 28, 2015 4:30 PM
> *To:* [email protected]
> *Cc:* [email protected]
> *Subject:* Re: [AFMUG] How many of you guys run MT wireless?
>
>
>
> What's the best MT wireless router for customers you guys using?, with
> best range and low DOA rate?
>
>
> —
> Sent from Mailbox <https://www.dropbox.com/mailbox>
>
>
>
> On Tue, Jul 28, 2015 at 5:12 PM, Glen Waldrop <[email protected]>
> wrote:
>
>  I'm a 90% MT shop.
>
> Upgrading everything to 802.11n slowly, just replaced a Crossroads in a
> 19dBi Rootenna with a QRT-2HnD, 17dBi dual polarity.
>
> Receive signal went from -83 to -70 on a 5MHz channel. I'm quite impressed.
>
> I'm going to test the unit and see if it is possible the old one was
> damaged, but we've never had good signal at this location. I figured I'd
> eventually lose them as a customer.
>
>
>
>

Reply via email to