Gotcha. This is how I've been doing it, just wondered if there was an easier way.
On Sat, Aug 8, 2015 at 2:28 PM, Sterling Jacobson <[email protected]> wrote: > The rack company sells trays with precut lengths of fiber. > > > > So I think we ordered with 100’ lengths and spliced it in the truck in a > large case splice that sits in a handhold about 10 feet away from the rack > on the curb. > > > > The crew liked this way better than splicing on the rack itself. > > > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Jason McKemie > *Sent:* Saturday, August 8, 2015 1:15 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Another neighborhood on fiber, sexy sexy! > > > > Looks good, how are you transitioning from the OSP cable to the TE > rackmount unit? > > On Friday, August 7, 2015, Sterling Jacobson <[email protected]> wrote: > > I guess the list doesn't like 2MB file attachments, lol! > > > > -----Original Message----- > From: Af [mailto:[email protected]] On Behalf Of Sterling Jacobson > Sent: Friday, August 7, 2015 3:35 PM > To: '[email protected]' <[email protected]> > Subject: [AFMUG] Another neighborhood on fiber, sexy sexy! > > This time I used a super dense 4U LC fiber panel that can connect up to > 576. > > I've got about 370 of it loaded with fiber, about a third of that will be > connected here. > > It requires the thinner mil cable which is the only PITA about this setup > really. > > It's using 24 port 1U fiber switches, but I'm still looking for a good > Planet rep to get the 48 port 1U density. > I could upgrade to those and fill out the entire 12U switch space to match > the 576 panel capacity. > Not going to have 100 percent take rate I'm sure, but it's nice to know I > can get the density in one cabinet. > >
