I have recently built a custom NVR box. It is on an old HP proliant microserver we had sitting around. Specs are 2 core CPU 2.0 Ghz, 4 GB RAM, 2 TB HD. I have 14 cameras installed on it recording motion and storing it for 4 weeks. The hard drive stays around 400GB used. Mix of cameras installed. Some old AirVision, a couple of UVC and one UVC pro. Installed Ubuntu Server and installed the Unifi Video and mFI software on the same server. Everything is working great so far. CPU Load is about 25%.
Regards, Gabriel Pike Network Support and Engineering MTCNA DMCI Broadband, LLC <http://dmcibb.net/> [email protected] 877.936.2422 Ext. 103 -----Original Message----- From: Af [mailto:[email protected]] On Behalf Of Adam Moffett Sent: Monday, August 10, 2015 11:44 AM To: [email protected] Subject: Re: [AFMUG] UniFi NVR for SCADA site Jamie, DId you buy their little NVR appliance or put the software on your own machine? Thanks, Adam On 8/10/2015 10:48 AM, Jaime Solorza wrote: > > We now have seven cameras at wastewater site monitoring entrance and > key operations 24/7. The new UniFi NVR with latest firmware is super > easy to set up. The feed goes over a two mile RocketM5 ptp link over > pecan farm to water company 45 ft tower. The night video is really > clear. >
