That is where I've been putting them, or in a hand-hole by the pole. The slack storage is another issue, but technically you can store that on the ADSS.
On Tue, Aug 18, 2015 at 2:21 PM, Adam Moffett <[email protected]> wrote: > So I guess the closure could only go on the pole..... > > On 8/18/2015 3:20 PM, Jason McKemie wrote: > > Simpler / cheaper installation. You can also do away with some make-ready > work since you can go closer to the neutral in many situations. The > downside is that splice closure placement is more of a PITA, since you > can't just clamp them to the strand. > > On Tue, Aug 18, 2015 at 2:16 PM, Adam Moffett <[email protected]> wrote: > >> Huh....you mean literally grab the cable and twist it before clamping it >> into the holder? Or do you mean coils? >> >> I'm looking at a place where I'm confident there will be no need for more >> strands during my lifetime. >> >> Upsides I'm guessing are simpler installation? Cheaper? >> >> On 8/18/2015 3:10 PM, Chuck McCown wrote: >> >>> It dances in the wind unless you give it several twists in each span. >>> Plus, on larger strand type deployments, you cannot come back and lash more >>> cables to the same strand. Other than that it has some nice upsides. >>> >>> -----Original Message----- From: Adam Moffett >>> Sent: Tuesday, August 18, 2015 1:05 PM >>> To: [email protected] >>> Subject: [AFMUG] ADSS cable >>> >>> Is there any downside to self supporting cable? >>> >> >> > >
