I remember reading the white paper on how they sorted it out, but I thought Cambium was the author.
From: Ken Hohhof Sent: Friday, August 21, 2015 6:42 PM To: [email protected] Subject: Re: [AFMUG] Epmp and omni There was a thread about this awhile back, ePMP is supposed to use magic built into the chipset to sort it out and lose nothing. PMP450 doesn’t do this because it’s a computationally intensive process that is done in dedicated hardware in the 802.11n chipset. If I remember correctly. From: Daniel White Sent: Friday, August 21, 2015 7:35 PM To: [email protected] Subject: Re: [AFMUG] Epmp and omni If you mix slant with linear polarization you should lose 3dB per chain. Thank you, Daniel White [email protected] Cell: +1 (303) 746-3590 Skype: danieldwhite Social: LinkedIn: Twitter From: Af [mailto:[email protected]] On Behalf Of Mathew Howard Sent: Friday, August 21, 2015 6:07 PM To: af <[email protected]> Subject: Re: [AFMUG] Epmp and omni They should work fine with an H/V omni, the Cambium 2.4ghz sectors are slant, but the integrated SMs are actually H/V - it works fine to mix slant and linear with ePMP. That said, KP does make a dual slant 2.4ghz omni. On Fri, Aug 21, 2015 at 6:46 PM, Josh Corson <[email protected]> wrote: Has anyone came across a good 2.4GHz omni for ePMP. As I remember they are dual slant radios and thus not a standard omni like a 2.4 ubiquiti will work. Correct me if I'm wrong. We are using rocket M2's with omnis now for small small sites and would be nice to get that gig port and higher capacity on 2.4 omni. On Fri, Aug 21, 2015 at 5:01 PM Mathew Howard <[email protected]> wrote: We've got a several of them deployed, I've used Chuck's antennas and UBNT antennas. They work as anything else with an omni. On Fri, Aug 21, 2015 at 4:40 PM, Josh Luthman <[email protected]> wrote: Any deployments? Certified? I knew there was an antenna to use already :) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 21, 2015 5:22 PM, <[email protected]> wrote: Like this? http://www.mccowntech.com/products.cfm?PID=78&Cat= From: Josh Luthman Sent: Friday, August 21, 2015 3:19 PM To: [email protected] Subject: [AFMUG] Epmp and omni Is this doable? Anyone doing it? Certified or no? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -------------------------------------------------------------------------------- This email has been checked for viruses by Avast antivirus software. www.avast.com
