Can you post more of the log where it watchdog resets? You should see a percentage beside the components so you can see more info as to why it reset.
On Fri, Aug 28, 2015 at 1:56 PM, Brian Sullivan <[email protected]> wrote: > Last week we rolled out 13.4 to 450 AP's after testing in-house for a > while. While running 13.2 we would see an AP here or there reboot on > occasion by itself. The only message in the Event Log mentions Watchdog > Reset. This is one of the bugs that Cambium noted was fixed in the 13.4 > release notes. > > Since we upgraded the network to 13.4 we are now seeing at least 4 AP's > out there rebooting several times per day. On one of these AP's we are > also seeing SM's (all 17 registered) reboot along with the AP. The site > has UPS backup so I know it's not a power grid problem. I am planning to > roll the affected AP's back to 13.2 this evening. > > Anyone else having Watchdog issues with the 13.4 release? > > ******System Startup****** > System Reset Exception -- Watchdog Reset > Software Version : CANOPY 13.4 AP-DES > Board Type : P12 > Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 - > 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms > FPGA Version : 040715 > FPGA Features : DES, Sched, US/ETSI; > 08/28/2015 : 14:11:42 CST : :Time Set > 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port. > > >
