I heard that 13.4 does not play nice with SM's that aren't on the same firmware. are all of the SM's at 13.4? I have 2 AP's and SM's at 13.4 and have not had any problems yet.
On Fri, Aug 28, 2015 at 3:21 PM, Ryan Ray <[email protected]> wrote: > Can you post more of the log where it watchdog resets? You should see a > percentage beside the components so you can see more info as to why it > reset. > > On Fri, Aug 28, 2015 at 1:56 PM, Brian Sullivan <[email protected] > > wrote: > >> Last week we rolled out 13.4 to 450 AP's after testing in-house for a >> while. While running 13.2 we would see an AP here or there reboot on >> occasion by itself. The only message in the Event Log mentions Watchdog >> Reset. This is one of the bugs that Cambium noted was fixed in the 13.4 >> release notes. >> >> Since we upgraded the network to 13.4 we are now seeing at least 4 AP's >> out there rebooting several times per day. On one of these AP's we are >> also seeing SM's (all 17 registered) reboot along with the AP. The site >> has UPS backup so I know it's not a power grid problem. I am planning to >> roll the affected AP's back to 13.2 this evening. >> >> Anyone else having Watchdog issues with the 13.4 release? >> >> ******System Startup****** >> System Reset Exception -- Watchdog Reset >> Software Version : CANOPY 13.4 AP-DES >> Board Type : P12 >> Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 - >> 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms >> FPGA Version : 040715 >> FPGA Features : DES, Sched, US/ETSI; >> 08/28/2015 : 14:11:42 CST : :Time Set >> 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port. >> >> >> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
