We've got a bunch of 450 stuff here running 13.4, and a cursory look shows AP's with 30+ to 40+ days of uptime on them.
On Fri, Aug 28, 2015 at 4:10 PM, Sam Lambie <[email protected]> wrote: > I heard that 13.4 does not play nice with SM's that aren't on the same > firmware. are all of the SM's at 13.4? I have 2 AP's and SM's at 13.4 and > have not had any problems yet. > > On Fri, Aug 28, 2015 at 3:21 PM, Ryan Ray <[email protected]> wrote: > >> Can you post more of the log where it watchdog resets? You should see a >> percentage beside the components so you can see more info as to why it >> reset. >> >> On Fri, Aug 28, 2015 at 1:56 PM, Brian Sullivan < >> [email protected]> wrote: >> >>> Last week we rolled out 13.4 to 450 AP's after testing in-house for a >>> while. While running 13.2 we would see an AP here or there reboot on >>> occasion by itself. The only message in the Event Log mentions Watchdog >>> Reset. This is one of the bugs that Cambium noted was fixed in the 13.4 >>> release notes. >>> >>> Since we upgraded the network to 13.4 we are now seeing at least 4 AP's >>> out there rebooting several times per day. On one of these AP's we are >>> also seeing SM's (all 17 registered) reboot along with the AP. The site >>> has UPS backup so I know it's not a power grid problem. I am planning to >>> roll the affected AP's back to 13.2 this evening. >>> >>> Anyone else having Watchdog issues with the 13.4 release? >>> >>> ******System Startup****** >>> System Reset Exception -- Watchdog Reset >>> Software Version : CANOPY 13.4 AP-DES >>> Board Type : P12 >>> Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 - >>> 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms >>> FPGA Version : 040715 >>> FPGA Features : DES, Sched, US/ETSI; >>> 08/28/2015 : 14:11:42 CST : :Time Set >>> 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port. >>> >>> >>> >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> >
