>From my thread "AF5x wattage" Wall is 123vac. Amp meter says 0.07a. 8.61 watts. This is the factory POE.
POE spits out 24vdc. Amp meter said 0.23a. 5.52 watts. I waited ~10 minutes after it booted to look. They were definitely associated. It's running 33dBm EIRP @ 5240. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Aug 31, 2015 at 12:10 PM, Jeremy <[email protected]> wrote: > They are one of the lowest power consuming backhauls on the market. I > think they use somewhere around 10 watts average. The power supply is 1A. > > On Mon, Aug 31, 2015 at 10:08 AM, Jeremy <[email protected]> wrote: > >> I am using them and they work great. Yes, they run on 24V. The correct >> pinout is printed on the POE. They are a different pinout from the gigabit >> Nanobeams, which add one additional ground pair. These also add another >> +DCV pair. >> >> On Mon, Aug 31, 2015 at 9:03 AM, Chuck McCown <[email protected]> wrote: >> >>> Should work. Do you know how much current they need? >>> >>> -----Original Message----- From: Nate Burke Sent: Monday, August 31, >>> 2015 9:01 AM To: Animal Farm Subject: [AFMUG] GIGE-POE-APC on AF5x >>> Anybody using GIGE-POE or GIGE-POE-APC units with AF5x? I'm guessing >>> just use a 24V instead of 48V supply and they should work? Right? >>> >>> Nate >>> >> >> >
