Power+data on the same wires requires a transformer.
On 9/10/2015 8:32 PM, That One Guy /sarcasm wrote:
you would need to use their hermetic thingamajig.
On Thu, Sep 10, 2015 at 4:59 PM, TJ Trout <[email protected]
<mailto:[email protected]>> wrote:
gigabit requires all 8 wires, you need a gige-poe from wbmfg.com
<http://wbmfg.com> to insert the power
On Thu, Sep 10, 2015 at 2:39 PM, Gilbert T. Gutierrez, Jr.
<[email protected]
<mailto:[email protected]>> wrote:
I am trying to power a SAF Lumina Radio with a CMM4 and having
the following difficulty...
I cannot get the radio to negotiate 1Gbps.
I have made a custom cable that takes an Ethernet cable cabled
to the B standard on both sides with the exception that Pins 4
and 8 are swapped on one side (solid Blue and Brown). This
allows me to power the radio via the CMM4 and get a 100mbps
link. I moved the cable that goes to the CMM4 switch from the
CMM4 from its standard 10/100 port to port 13, a gigabit port
and I still am only able to get 100mbps. Next I took a Cambium
power supply for a PMP430 AP and used my cable connecting
directly to my laptop and still only got a 100mbps link. If I
power the radio with a standard SAF power supply and cable, I
do get 1gbps on the Ethernet link.
Did I cable something wrong causing me not to negotiate to the
full Ethernet link speed?
Gilbert
--
If you only see yourself as part of the team but you don't see your
team as part of yourself you have already failed as part of the team.
