Eric, PDMNet has some good used 4 ft and 3 Radiowaves dshes if you need some.
Paul From: Af [mailto:[email protected]] On Behalf Of Eric Kuhnke Sent: Wednesday, September 23, 2015 7:06 PM To: [email protected] Subject: Re: [AFMUG] 4' size 5.x GHz dual pol dishes Yeah, I know all about the Andrew and Radiowaves dishes... There are some Chinese manufacturers making ETSI class 3/4 licensed band 6 GHz dishes I am looking at (Shenglu, etc). Same deep shroud and seriously heavy construction as their part101 type dishes. It remains to be seen if I can find one with the correct 5200-5850 MHz tuned dual polarity feed horn and 50-ohm type N connectors on the back. On Wed, Sep 23, 2015 at 4:04 PM, Faisal Imtiaz <[email protected]<mailto:[email protected]>> wrote: Step into the world of Telecom / Licensed Dish Antenna Mfg. Be prepared to pay .... Radiowaves and Andrew for starters .... :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] ________________________________ From: "Eric Kuhnke" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Wednesday, September 23, 2015 6:57:48 PM Subject: [AFMUG] 4' size 5.x GHz dual pol dishes Is there anything new on the market I should be looking at? Looking for something larger than the 3' size ubnt or jirous shielded/shrouded 32-34dBi dishes. High sidelobe suppression, deep shours and a decent f/b ratio are a must.
