Dan,
Can the hardware give CRC error counts? That would be nice to have in
the GUI. It's very helpful on Canopy.
On 9/29/2015 8:09 AM, Dan Sullivan wrote:
Hi SmarterBroadband,
Today ePMP does not provide a �count� for how many times the ethernet
link has gone up and down.
We do provide a trap every time an up or a down event happens via RFC1213.
Dan
ePMP Software Manager
*From:*Af [mailto:[email protected]] *On Behalf Of *SmarterBroadband
*Sent:* Monday, September 28, 2015 7:09 PM
*To:* [email protected]
*Subject:* [AFMUG] Link Status
Is there anywhere in an ePMP or Mikrotik to see a Ethernet Link
count. i.e. how many time it has gone up and down �count� like in a
Canopy unit.
I keep getting a ether1 link down and then link up in my Tik log
(which causes an OSPF neighbor state change), but both radio and tik
show no Ethernet errors so I cannot see if it is a port issue at one end.
