It's possible they attached the dishes to the final tower segment before raising it with a gin pole attached to the second-to-last tower segment? 

Or the original install involved a big truck crane raising the dish, two guys with two separate tag lines tied off on the front left/right sides of the dish to keep it under control, and a couple of guys on the tower to mount it.


On 10/5/15 5:00 PM, Craig House wrote:
I have wondered the same thing.  I have talked to a crane company about removing them just to free up the wind load they create but for the cost of the crane I'd think I could do it myself if it were not for the issue of not having an attachment above the dish.  The top dishes actually are about 2 feet above the top of the tower.

Craig



From: "Eric Kuhnke" <[email protected]>
To: [email protected]
Sent: Monday, October 5, 2015 6:40:55 PM
Subject: Re: [AFMUG] OT: Free 6 ft size, 6 GHz high performance dish,        you haul

I wonder how they got the dishes on the top of that in place originally. Crane?� Based on my knowledge of rigging methods, I'm trying to figure out in my head a way to establish an anchor and pulley above those dishes to lower it with a steel cable and winch, but they're right at the top of the tower. Or vice versa, to raise one following a cable path at a 35-45 degree angle...

There is a 25-floor building near here with a nice 8 ft size 6 GHz Andrew dish. I could have it for free. It's built from heavy gauge everything and probably weighs 600 pounds. The only way to get it down now would be a helicopter, it's been up there 25+ years.


On 10/5/15 4:21 PM, Craig House wrote:
I have six of them on the tower that are 8 foot and 12 foot size if anyone wants to come get them off the tower they can have them



Sent from my iPhone

On Oct 5, 2015, at 18:17, Eric Kuhnke <[email protected]> wrote:

It's located on a hilltop in Bo, Sierra Leone. Bring a capable 4x4. Photos attached.

Any takers?  :)




<IMG_20150227_122749.jpg>
<IMG_20150227_130030.jpg>



Reply via email to