Correct Eric, we specifically set out to have a single product for the entire band 10.7-11.7 band, for both cold sparing cost reduction and ease of licensing flexibility since some do not go after certain parts of the band because of sparing costs.
So you simply set up one side as the master and setup the frequencies, channel size, and the PHY mode essentially, that were licensed for each location and off you go. Cheers, Jaime Fink Chief Product Officer Mimosa From: Af <[email protected]<mailto:[email protected]>> on behalf of Eric Kuhnke <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, October 21, 2015 at 7:41 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] Mimosa Sales Engineer ?? One question question, for the radio B11 radio head, there is no such thing as a separate high/low model? Either end is fully software configurable for all of the different TDD and FDD-like modes? On top of the relatively low price this is a good thing for reducing the number of cold shelf spares one needs to keep on hand. On Wed, Oct 21, 2015 at 7:32 AM, Jaime Fink <[email protected]<mailto:[email protected]>> wrote: Yes, you can’t trust that guy ;) You went to the right place, they can get you started on B11 questions and get you to the experts as well, they’re usually back to you immediately in the morning, we run 7AM-7PM Pacific hours at the time being. Cheers, Jaime Fink Chief Product Officer Mimosa From: Af <[email protected]<mailto:[email protected]>> on behalf of Mike Hammett <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, October 21, 2015 at 6:17 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] Mimosa Sales Engineer ?? Mimosa has good guys working for them. I've spoke with at least a half dozen of them and they're all awesome. Well, except that Jaime guy. I don't like him. ;-) I'd expect a response during business hours. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "Paul McCall" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Wednesday, October 21, 2015 8:14:21 AM Subject: Re: [AFMUG] Mimosa Sales Engineer ?? Yeah, “nobody was home” so I left a message on that site. Didn’t know who or the depth of someone that might respond eventually. Thought maybe some of our crew has already been interacting with the “go-to” guy for this From: Af [mailto:[email protected]] On Behalf Of Mike Hammett Sent: Wednesday, October 21, 2015 9:13 AM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Mimosa Sales Engineer ?? Have you taken a look at their design tools on their web site? If so, just use the chat window on the page. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ________________________________ From: "Paul McCall" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Wednesday, October 21, 2015 8:09:42 AM Subject: [AFMUG] Mimosa Sales Engineer ?? Who is the contact we should be talking to about engineering some B11 links? Needing to discuss layouts across my network. Paul Paul McCall, Pres. PDMNet / Florida Broadband 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 office 772-473-0352 cell www.pdmnet.com<http://www.pdmnet.com/> [email protected]<mailto:[email protected]>
