Drop them ethernet from your switch? or fiber if your concerned about their equipment
Craig ----- Original Message ----- From: "Josh Luthman" <[email protected]> To: [email protected] Sent: Thursday, October 22, 2015 2:18:01 PM Subject: Re: [AFMUG] Serving customers next door to tower I was trying to avoid another radio on the tower if at all possible. I'll probably start with just an integrated radio in the building and hope that it works. Worst case I'll probably end up with a Loco at 45* downtilt =P Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Oct 22, 2015 at 3:02 PM, David < [email protected] > wrote: Josh, depends on how you want to hand off service inside the building. If they just want WIFI everywhere do a ePMP with wifi firmware loaded integrated unit should work pointed at it from the tower If thats not doable use to ePMP PTP and hand off ethernet inside with an indoor AP On 10/22/2015 11:02 AM, Josh Luthman wrote: <blockquote> Does anyone have any tips for this? My only thought process was to do an integrated radio *inside* the office building to keep from hearing every AP on the tower. We've had some issues with nearby customers using a Force110/Beam hearing way too much of the tower so we moved to Integrated/Nano to solve their problems. I have a business that needs service and it's literally the same address as the tower (150 feet up). It's 60 feet away to the middle of the office but the ends are about 120 feet away. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 </blockquote>
