We have AF 24HD at 1.39 miles, signal is -53. `S
From: Af [mailto:[email protected]] On Behalf Of Faisal Imtiaz Sent: Thursday, October 29, 2015 15:52 To: [email protected] Subject: Re: [AFMUG] Airfiber 24 HD Cannot speak for the link calculator, but I can share with you the following:- 1) -64/-65 is the right signal level for a link distance of 3.5 miles 2) yes the chains should be balanced (all of them the same or +/- 1-2db), your one side is rather off ... (when you have them just right, it does take a bit of patience, each side of the chain should be similar or the same +/- 1db 3) you might want to reduce the RX gain to low, and or if you leave the gain high, try reducing the power one 1db at a time... to get the full 8x modulation... Best of Luck Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected]<mailto:[email protected]> ________________________________ From: "Sterling Jacobson" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Thursday, October 29, 2015 6:30:07 PM Subject: Re: [AFMUG] Airfiber 24 HD Ooops, wrong image, lol! This is the one that I thought I attached, but didn’t show up as an attachment. From: Af [mailto:[email protected]] On Behalf Of Faisal Imtiaz Sent: Thursday, October 29, 2015 4:23 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Airfiber 24 HD You Sure ? Here is attached proof... doing max of 47G x 9.42G on a 100meg port ! LOL! Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected]<mailto:[email protected]> ________________________________ From: "Josh Luthman" <[email protected]<mailto:[email protected]>> To: [email protected]<mailto:[email protected]> Sent: Thursday, October 29, 2015 6:15:02 PM Subject: Re: [AFMUG] Airfiber 24 HD Somehow I really doubt you got 8.4gbps on a gigabit port. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Oct 29, 2015 at 6:13 PM, Sterling Jacobson <[email protected]<mailto:[email protected]>> wrote: Sorry, this was the picture of the link in question. What should I be seeing? -----Original Message----- From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Sterling Jacobson Sent: Thursday, October 29, 2015 4:00 PM To: '[email protected]<mailto:[email protected]>' <[email protected]<mailto:[email protected]>> Subject: [AFMUG] Airfiber 24 HD Is there a good link estimation utility for the Airfiber 24 HD? I like the UBNT online link calculator, but it doesn't work with 24Ghz? This is the link I just put up, shouldn't the chains all be about equal dB? What does it mean when the second chain is so much different from the first on these units? Don't even know if the dB is dialed in at this range :(
