Primarily want it for the PTP450 platform right now. Have used a parasitic in past but just powering off the syncport would be less points of failure and simpler install. It appears when you enable the uGPS power option on a PTP450 the override plug voltage jumps from around 3 volts to around 5 volts. Maybe you could make same part work for both 450 and 450i with different pinout on jumper?
On Fri, Oct 30, 2015 at 1:50 PM, Forrest Christian (List Account) < [email protected]> wrote: > For which platform? > > I'm doing some work to support the timing port on the 450i which is.... > ummm... yeah.... let's just call it different. This work may result in > something UGPS-like either specifically for the 450i or for everything. > > Otherwise, I've been shipping a SyncPipe Parasitic and/or SyncBox 12 which > ends up with roughly the same effect for quite some time now. Not gigabit > capable (currently), unfortunately. > > Do you have a specific application in mind? > > -forrest > > On Fri, Oct 30, 2015 at 9:05 AM, Matt <[email protected]> wrote: > >> Is there a UGPS syncpipe in works for Cambium? >> > > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
