Sorry - what Dan said. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 2, 2015 6:24 PM, "Dan Sullivan" <[email protected]> wrote:
> Hi Nate, > > > > You can go to the AP to which the SM is currently registered and select > Monitor -> Wireless. In the list of registered SMs will be your SM. You > select “Deregister” and the SM will search for an AP again. > > > > Preferred AP is used when the SM is doing network entry. The SM scans and > identifies all APs that it sees. Then the SM uses the Preferred AP upon > the APs found during scanning. > > > > Dan Sullivan > > ePMP Software Manager > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Josh Luthman > *Sent:* Monday, November 02, 2015 5:17 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] EPMP Rescan > > > > On monitor wireless click rescan? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Nov 2, 2015 6:13 PM, "Nate Burke" <[email protected]> wrote: > > I could just be overlooking it, but is there a way to rescan an EPMP Sm if > it's associated to the wrong sector? Or is Rebooting the SM or Kicking it > from the Wrong AP the only way? > > Does the 'Preferred AP' Only matter when the radio is initially scanning? > >
