Bill
I checked the tool mac-server its showing interfaces is all. So it could be an
firewall issue? Because I am using RB750 as customers router.
Tim
-----Original Message-----
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Date: 11/11/15 04:18 PM
Subject: Re: [AFMUG] cant get into routerboard via ip
Make sure the winbox MAC server is running on the interface you're using:
/tool mac-server mac-winbox
Make sure that you're allowing discovery on the appropriate interface:
/ip neighbor
Make sure you're not locking out any IP ranges you need:
/ip service
bp <part15sbs{at}gmail{dot}com> On 11/11/2015 12:59 PM, Tim Reichhart wrote:
Bill how do allow that via command line on that routerboard? Tim -----Original
Message-----
From: "Bill Prince" <part15...@gmail.com> To: af@afmug.com Date: 11/11/15 03:54
PM Subject: Re: [AFMUG] cant get into routerboard via ip Check to see if you're
allowing winbox on the interface you're using. Can you get in via the MAC
address with winbox (specify the MAC address instead of the IP address)? bp
<part15sbs{at}gmail{dot}com> On 11/11/2015 12:50 PM, Tim Reichhart wrote:
Guys I am having an issue right now with an routerboard connecting to it by
winbox ip but can get to it from other routerboard that is inside of the
network via mac address. Is there something I need to do to make this work? Tim
